Wireless Addressable Software based Voice Evacuation System.
A HARDWARE IBM/HP  Tower Server  for 24 x7 application
2 Application For Voice Evacuation System
3 Processor Intel® Xeon®  Quad Core
4 Memory 2GB standard memory
5 Cache 8 MB
6 Hard Drive 250GBX2
7 Chipset Intel compatible Chipset
9 RAID controller RAID 1
10 Disk bays
Hot Swap
Up to 2 nos 3.5″ hot-swappable Serial Attached SAS
11 Network Interface integrated dual Gigabit Ethernet
12 Industry standard compliance Microsoft® Logo certifications

Operating System : Windows Server 2011

13 Ports Front: 2 USB Rear: 2 USB, 1 Ethernet, 1 video, 1 serial,
14 Power supply Redundant Hot Swappable with external additional power supply
15 Server power cords IEC power cord  with NEMA power cord
16 System fans 1 fan
17 Monitor 21” LED.
18 UPS 1 KVA
19 Server Rack Standard
20 Printer Laser Jet, Make -HP
21 Operating System Microsoft Window 2011OEM with 5 user
22 Ethernet Switch 8 port 10/100 MBPS
B Loop 08 Loop
D IP Audio Zones 8 Zone
E  IP Amplifier 1X100W 4 Ohm Mono channel Class D Amplifier
g Converter 8×4 ohm  100w mono channel to 100 volt audio line Converter
H Interface With Wireless Addressable Fire Detection System CMS
I  IP Audio Decoder Applications:

  • Multi room IP Audio System Receiver
  • Internet Radio Receiver
  • Instore Audio Player
  • SIP and IP Paging Zone Device
  • Digital Announciator  Message Player, Message Repeater
  • Generic VoIP decoder for IP Paging and Announcement applications
  • Commercial Audio Streaming Applications


  • AACplus, MP3, Ogg Vorbis, G.711, PCM linear Decoding
  • IP Streaming via TCP, UDP, RTP, Multicast
  • Line Level Output (Stereo)
  • Relay Output (Ex110 & Ex120 only)
  • RS-232 Serial Port
  • Power Supply (9-30V, plug included)
  • IR receiver and Display built-in (Ex110 & Ex120 only)
  • MicroSD or USB Flash Interface

Technical Specifications:


  • 9 to 30 VDC, 5 Watt max.
  • 2.1mm barrel connector


  • 10/100Mbps auto,
  • RJ-45 connector with integrated Link/Activity LED
  • Protocols: TCP/IP, UDP, RTP, SIP, DHCP,

Multicast capable

  • ES-100/spkr (Ethersound, output, no daisy-chain) support

Analog Output

  • Line level output, 40..60 Ohm output impedance on RCA and 1/8″ headphone jack. Output level software controllable
  • Full scale output voltage: 5.6 dBu, 4 Vpp
  • Frequency response (-3dB) 19Hz ..22kHz *
  • Dynamic range 87 dB
  • SNR/THD -87 dB, <0.05%

Audio formats

  • MP3 CBR/VBR, up to 320kbps, 8..48kHz sample freq.
  • AAC, AAC plus, AAC-HE (AAC plus V2)
  • WMA (up to version 9), Ogg Vorbis
  • PCM 16bit @8, 16, 22.05, 24, 32, 44.1, 48 kHz
  • G.711, uLaw, aLaw (sample rates same as PCM)

Discrete I/O

  • 1 NO relay contact, 24V 0.5A (110&120 models only)

RS-232 Interface

  • 300..230’400 Baud asynchronous, tunneling or local control


  • Backlit LCD, 2×16 chars (110&120 models only)

IR Interface

  • IR via serial port, built-in IR receiver (110&120 models only)
  • IR remote control included with Exstreamer 110 & 120
J Speakers 6W 100V Wall Mounted

Salient features:

  • Micro-Communication based control panel (part of FAS installation) – allowing the system to receive and process trigger/events.
  • Software based central monitoring system capable of monitoring multiple locations
  • Trigger events tracking and managements from single centrally located system.
  • The central monitoring system capable of monitoring multiple locations
  • Central monitoring system capable of transmitting the message for the occurred event immediately on the network, to the specified/concerned location
  • Multiple locations (trigger points) can be viewed & message can be transmitted simultaneously.
  • The events will be gathered in real time and communicated to central monitoring unit – to be seen and managed on a giant video wall.
  • Prominent user controls with attractive appearance
  • Compatible with RF hardware addressable systems and network outstations.
  • Print graphical pages with automatic event logging.
  • Multi level password protection.
  • Unlimited number of graphical pages.
  • Allows one to add, associate and manage audio receiving units of PAS
  • Allows one to enter each audio receiving unit in PAS.
  • Allows one to associate an audio receiving unit with zone.
  • Configure pre-recorded messages for detectors: Allows one to set up pre-recorded messages for each type of detector.
  • Audio Driver Configuration: Allows one to setup/select device to sound input (recording).
  • Record messages and transmit/play in real time in selection locations/zones.
  • Scheduler: Allows one to setup a schedule to play pre-recorded messages at selected locations/zones.
  • Offline Units:  Offline unit list, so that the units can be checked and maintained.
  • Emergency fire alarm system interface announcement.
  • Facility for live announcement through multiple IP paging stations with priority set.
  • Facility for pre-recorded announcement using master IP paging station,
  • Facility for background music using a music source
  • Remote health monitoring of power, audio-in, audio-out, overload etc.,